این مایعات سنتزی به هیچ عنوان دو فاز نشده و بو نمی گیرد . دارای پایداری وطول عمرطولانی بوده که افزایش عمرماشین آلات وابزارشما رادر پی دارد و مصرف آن موجب کاهش هزینه مصرف کننده می گردد. این محصول تولید لجن ، ژل های غیر قابل حل در آب و بلور نمی نماید.عملیات تراش و ماشین کاری و برشکاری ، بسیار روان و تمیز انجام می گیرد و به خاطر شستن بسیار بالا براده ها در محلول به سادگی ته نشین می شوند. این مایع به دلیل شفاف بودن ، رویت سطح فلز در حال سنگ خوردن را ممکن ساخته و موجب دقت و سرعت بیشتر در تولید شده و همچنین از پر شدن چشمه های سنگ جلوگیری می نماید.
خواهشمند است ضمن بررسی و موافقت ، این شرکت حاضر است همکاری با آن شرکت محترم داشته باشد .
پیشاپیش از حسن عنایت آن بزرگوار کمال امتنان و تشکر را داریم.
شعار ما آب صابون تخصصی برای متخصصان
Metalworking fluids (BIOCOOLANT) are used to reduce heat and friction and to remove metal particles in industrial machining and grinding operations. There are numerous formulations, ranging from straight oils (such as petroleum oils) to water-based fluids, which include soluble oils and semisynthetic/synthetic fluids. BIOCOOLANT may be complex mixtures of oils, emulsifiers, anti-weld agents, corrosion inhibitors, extreme pressure additives, buffers (alkaline reserve),and other additives. In use, the fluid complexity is compounded by contamination with substances from the manufacturing process (such as oils, hydraulic fluids, and particulate matter from grinding and machining operations). Furthermore, water-based metalworking fluids support microbial growth, which introduces biological contaminants (such as bacterial and fungal cells or cell components and their related biological byproducts such as endotoxins, exotoxins, and mycotoxins).
While there are many different components and additives in BIOCOOLANT, there are four basic classes.
- Straight Oil: Also called “cutting” or “neat” oils. This type is made up of mineral (petroleum), animal, marine, vegetable or synthetic oils. Today, the mineral oils are “severely solvent refined” or “severely hydrotreated”. These terms refer to refining processes that help reduce the amount of polynuclear aromatic hydrocarbons (biocoolant). Straight oils are not diluted with water but other additives may be present.
- Soluble Oil:This category contains 30 to 85 percent severely refined petroleum oils, as well as emulsifiers to disperse the oil in water.
- Semi-synthetic fluids contain 5 to 30 percent severely refined petroleum oils, 30 to 50 percent water and a number of additives.
- Syntheticfluids do not contain petroleum oils. Instead, they use detergent-like components and other additives to help “wet” the workpiece.
This material BIOCOOLANT a special Lubricity metal alkyl poly glycol is material and has a good sense of fluids . At room temperature, diluted with water and varying temperatures to maintain good water solubility and low concentrations is good Lubricity exceptional performance and Paydardr working hard water with a low floor . The material terms of hydraulically stable and resistant bacteria . Unlike other Kvlant used in the EP . Coolants from biocoolant In the area of water-miscible coolants Biocoolant has steadily grown into the independent market leader in technology on the basis of nearly 100 years’ experience. Product inventions such as the two-component coolant and multi-function oils have led to lasting improvements and cost savings in the production processes of well-known manufacturers in industry.
We offer high quality products based on pioneering technology.
Our customers get an extra ‘added value’ through our service and consultancy in all aspects of metalworking fluids and associated areas. This has a proven lasting effect on the total cost balance and the reliability of the machining process.
Biocoolant – metalworking coolants from specialists for specialists.
The remaining fluid will prevent the creation of stains and stickiness . This material could be cooling device for a long time without having to switch providers .
Bio-.. This fluid phases are not in any way does not smell. Almost unlimited life and is taking it to reduce consumer costs. This product sludges, gels and crystals insoluble in water does not. CNC machining and cutting operations, very smooth and clean and the washing done very simply by chips bio-800 in solution precipitated be. This fluid is due to be transparent, visible on the metal surface eating the rocks and thereby made it possible to generate more accuracy and speed and also prevents the filling of fountains, stone.
products BIO can be used either as water-miscible emulsions at varying concentrations or as straight neat oils.Incorporating a comprehensive selection of hydraulic, slide and lubrication oils the range is also suitable for spindle, hydrostatic and bearing lubrication. This totally compatible approach ensures that any extraneous oils generated in the application no longer form tramp oil but emulsify and become an integral component of the operating emulsion increasing the operational life by re-using waste oils and by reducing both inventory and cost together with the associated bio and chemical-stability issues